Technical Details
Complete with built in non-return valve, the units logic control senses either a pressure drop, or minimum flow of 1 lpm to automatically start the pump.
Should the supply become restricted or run-out then the control module will sense this and stop the pump to avoid damage.
Each mode of operation is indicated on the control panel.
| General | |
| Product code | 41011 |
| Guarantee | 1 year |
| Features | |
| Run on timer | 3 sec |
| Dry run protection | |
| Performance | |
| Maximum Liquid temperature ** | 65 °C |
| Minimum liquid temperature | 4 °C |
| Maximum flow | 120 l/min |
| Cut in pressure | 1.5 bar |
| Maximum working pressure* | 1000 kPa (10 bar) |
| Maximum ambient air temperature | 50 °C |
| Flow switch sensitivity (approx) | 1 l/min |
| Connections | |
| Connections | G 1 male |
| Electrical | |
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz 220 V a.c./ 1 / 60 Hz |
| Current (full load) | 8 Amps |
| Physical | |
| Enclosure protection | IP65 |
| Height (from inlet to outlet) | 165 mm |
| Weight (including fittings) | 1.15 Kg |
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
| Pump Variants | |
| Part no | Description |
| 41011 | Control Module 1.5 bar |
