Stuart Turner Monsoon Standard 2.0 bar Single – Shower & whole house pumps

Part Ref: 46497


Monsoon Standard 2.0 bar Single pumps are ideal for boosting a water supply in vented systems. Suitable for positive head applications only.

Category:
Manufacturer:

Asset 1      

Description

Suitable for domestic use, Monsoon Standard pumps will function under positive head conditions and are suitable for installation into open vented hot and cold water systems.

Monsoon Standard pumps require a flow of just 0.6 l/min through the outlet to start.

Application

  • Boost the water pressure in either the hot or cold water supply in a positive head application.
  • Boost the blended water outlet between the shower valve and the shower rose.


Technical Details

Technical Specification

General
Product code 46497
Guarantee 5 years
WRAS approval 1404702
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Anti vibration feet
Inlet strainer(s)
Flexible hoses 2
Dry run protection
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 2.0 bar
Performance @ 9 l/min 1.5 bar
Performance @ 18 l/min 0.7 bar
Maximum flow 27 l/min
Maximum static inlet pressure 14 metres
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.6 l/min
Connections
Pump connections G ¾ male
Flexible hoses
Connections (UK model) G ¾ female x 22 mm push-in
300 mm long
Isolating valves on all hoses
Connections (ROI model) G ¾ female x 21 mm push-in
300 mm long
Isolating valves on all hoses
Connections (Export model) G ¾ female x G ¾ female
300 mm long
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.1 Amps
Power consumption 245 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IPX4
Length 200 mm
Width 126 mm
Height (excluding hoses) 202 mm
Weight (including fittings) 5.4 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

You may also like…