Description
The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.
The pump also features a built-in bypass, meaning that when the mains pressure exceeds 1.5 bar, the additional performance is not restricted.
Application
- At times when there is insufficient mains water pressure Flomate is designed to ensure that the pump will deliver an additional 1.5 bar to any existing mains pressure at a maximum flow rate of 12 l/min
Key Features
- 3 year guarantee
- Maximum output flow rate 12 litres/minute
- Increases mains water pressure by 1.5 bar
- Compact size
- Quiet operation
- WRAS approved product
- Built-in bypass
- Automatic switching
- Dry run protection
- Continuously rated
- Robust brass construction
- Patent protected
Technical Details
| General |
| Product code |
46574 |
| Guarantee |
3 years |
| WRAS approval |
1210040 |
| Features |
| Pump type |
Peripheral |
| Mechanical seal |
EPDM / PTFE / Al. Oxide |
| Anti vibration feet |
|
| Dry run protection |
|
| Materials |
| Pump body |
Brass |
| Impeller |
Brass |
| Performance |
| Maximum head (closed valve) |
3.2 bar |
| Maximum flow |
12 l/min |
| Maximum working pressure* |
600 kPa (6 bar) |
| Maximum ambient air temperature |
40 °C |
| Min / Max water temperature |
Min 4 °C / Max 35 °C |
| Flow switch sensitivity (approx) |
0.6 l/min |
| Connections |
| Pump connections |
G ¾ male |
| Motor |
| Type |
Induction, auto-reset thermal trip |
| Duty rating |
Continuous (S1) |
| Electrical |
| Power supply/phase/frequency |
230 V a.c./ 1 / 50 Hz |
| Current (full load) |
1.5 Amps |
| Power consumption |
340 Watts |
| Fuse rating |
5 Amps |
| Power cable (pre-wired) |
1.5 metres |
| Physical |
| Enclosure protection |
IPX4 |
| Length |
210 mm |
| Width |
130 mm |
| Height (excluding hoses) |
231 mm |
| Weight (including fittings) |
5.2 Kg |
* The maximum pressure that can be applied to the pump under any installation conditions.
